Crankshaft Machining Onsite | Crank Pin Repair | Crankshaft Repair | Leaders in Crankshaft Grinding | RA Power Solutions

It is experienced that Diesel Power Plants & Shipping companies award the repair companies job of Crankshaft Grinding, repair & overhaul of the engine without checking their credentials. This results in to the major break down & heavy losses to the clients. RA Power Solutions has experience of 40 years in this field of repair of Crankshaft, Overhauling of high capacity Diesel & major engine repair. The services extended by us are far better then the International standard and our service charges are lowest in the world.

Inspection of Crankpin Before Grinding
Inspection of Crankpin Before Grinding
Inspection of Crankshaft is in Process
Inspection of Crankshaft is in Process

 

 

 

 

 

 

 

We have 24/7 availability of technicians with necessary credentials & valid Indian CDC. They can travel to any destination in the world in short notice. We are the only company in the world which manufactures onsite crankshaft grinding equipment up to 700 mm & provide Crankshaft repair services as well. We have sold 70 onsite Crankshaft Grinding machines & have trained more than 150 technicians to undertake the repair of Crankshaft.

Grinding of Crankpin by RA Power Solutions is in Process
Grinding of Crankpin by RA Power Solutions is in Process
Grinding of Crankshaft is in Process
Grinding of Crankshaft is in Process

 

 

 

 

 

 

 

 

Stop availing the Crankshaft repair and Engine overhaul services from the local companies & avail the benefit of our experienced & low-cost services provided with the guarantee.

Portable Crankshaft Grinding & Polishing Machine by RA Power Solutions
Portable Crankshaft Grinding & Polishing Machine by RA Power Solutions

We provide all the services related to repair of Crankshaft which includes following:

I) Complete Calibration of Crankshaft diameter ranging from 30 mm to 700 mm. Inspection includes dimensional inspection of Crankpin & main journal, checking of hardness, Crack detection test with MPI, surface roughness test. Inspection report in detail on our formats are prepared and submitted to our client.

II) On-site Grinding & Polishing of Crankshaft maintaining the tolerances as mentioned in the maintenance manual of the engine manufacturer.

III) Straightening and Peening of Crankshaft.

IV) Replacement of Crankshaft in case of rejection

The author is Mr. Raj Shahani Managing Director of RA Power Solutions having experience of almost four decades of working on high capacity diesel engines, turbines, and rotary equipment. The company specializes in executing the repairs i.e. metal stitching/metal locking, grinding and repair of crankshafts, crankshaft machining, rebabbitting of bearings, connecting rod reconditioning, overhauling of Engines which have a serious problem resulting to the immense saving to the owners.

For more information, please email us on info@rapowersolutions.com or Call us on +91 – 124 – 437 8292, +91  9213604692

Crankpin After Grinding by RA Power Solutions
Crankpin After Grinding by RA Power Solutions
Damaged Crankpin Before Grinding
Damaged Crankpin Before Grinding

It is experienced that Diesel Power Plants & Shipping companies award the repair companies job of Crankshaft Grinding, repair & overhaul of the engine without checking their credentials. This results in to the major break down & heavy losses to the clients. RA Power Solutions has experience of 40 years in this field of repair … Continue reading “Crankshaft Machining Onsite | Crank Pin Repair | Crankshaft Repair | Leaders in Crankshaft Grinding | RA Power Solutions”

Crankshaft Machining | Crankshaft Grinding Services | Onsite Crankshaft Repair Services – RA Power Solutions

 

Damaged Crankpin of MAN Engine
Damaged Crankpin of MAN Engine

Development of Taper and Ovality is common in Crankshaft which gets developed due to continuous running of the engine. 

RA Power Solutions is having experience of forty years in onsite Grinding and polishing of Crankshaft diameter ranging from 30 mm to 700 mm. The Onsite Grinding and repair is executed by experienced technicians. We use portable crankshaft grinding machine which is specially developed to undertake Crankshaft grinding and Crankshaft polishing within the tolerances stipulated by the manufacturer.
 
It is possible to undertake Crankshaft grinding and Crankshaft polishing while the Vessel is sailing.
Onsite Grinding of Crankshaft While Vessel is Sailing
Onsite Grinding of Crankshaft While Vessel is Sailing
Inspection of Crankpin Before Grinding
Inspection of Crankpin Before Grinding

 

 The Crankshaft grinding machine used for Crankshaft repair is manufactured of Titanium alloy which absorbs the vibrations and facilitates to maintain the close tolerance within 20-30 microns. We are the world leaders in Onsite Repair and offer Crankshaft Grinding Services on the lowest price with international standard. All the Crankshaft repairs undertaken by us are guaranteed for satisfactory performance of Crankshaft and engine.
For more information, please email us on info@rapowersolutions.com
Onsite Crankshaft Grinding Repair Machine
Onsite Crankshaft Grinding Repair Machine
Inspection of Crankpin After Grinding
Inspection of Crankpin After Grinding

  Development of Taper and Ovality is common in Crankshaft which gets developed due to continuous running of the engine.  RA Power Solutions is having experience of forty years in onsite Grinding and polishing of Crankshaft diameter ranging from 30 mm to 700 mm. The Onsite Grinding and repair is executed by experienced technicians. We use … Continue reading “Crankshaft Machining | Crankshaft Grinding Services | Onsite Crankshaft Repair Services – RA Power Solutions”