In case of damage to engine components or cracks, RA Power Solutions repairs them onsite by metal stitching or metal lock surgery. We lead this field because we use master lock, masterpiece, keys, and high-quality consumables imported from the UK.

Our technicians have extensive experience. They can execute crack repairs and repair damaged casting components while the vessel is sailing.

Following is the process of metal locking, metal stitching, and its advantages.

Process of Metal Locking, Metal Stitching:

Experts accept the metal stitching process as the method for repairing all cracked, broken, and damaged castings in cast iron, aluminium, and steel.

The Stitching Process:

• First, we identify visible and invisible cracks.
• We clamp the parts together to restore them to their original position.
• We make a rectangular hole across the fractured portion.
• This hole is made by drilling and chipping.
• We insert the master lock, a large rectangular key of special metal, into the hole.
• We insert locking pins alongside the master lock. These pins provide a tight and secure master lock.
• We insert a length of metal stitching keys on the sides of the master lock. These keys prevent the locking pins from falling out when the casting faces high vibrations.

Advantages of Metal Stitching:

• No heat stress is induced
• No Distortion occurs
• In many instances, machining is not required
• Invaluable in emergencies
• Reduces downtime
• Gas/ Liquid proof repair

Crack Repair in Grey Cast Iron | Aluminium and Cast Steel Components 

We have observed that accidents or continuous engine running cause cracks in grey cast iron, aluminium, and cast steel components. You do not need to disassemble the equipment or repair it by welding. We undertake the repair of cracks and badly damaged components by metal stitching and the metal lock surgery process.

Experts have proven the effectiveness of this crack repair method. They use it widely all over the world.
We provide 24×7 crack repair services in grey cast iron, aluminium, and cast steel components using metal stitching and metal locking.

We have a dedicated team that undertakes crack repair of cast iron and repair of damaged casting. RA Power uses special pneumatic tools, locks, and keys to execute the repairs. We guarantee satisfactory performance for all crack repair jobs in grey cast iron, aluminium, and cast steel components.

We extend metal stitching services all over the world, including countries like Brazil, Egypt, Panama, Russia, Argentina, Ecuador, Czech Republic, Senegal, Fiji, France, Germany, Dubai, Kenya, Chile, and Mexico.

For more information on metal lock surgery, please email us at rajshahani@rapowersolutions.com, info@rapowersolutions.com, or call us at +91 9582647131 or +91 9810012383.

FAQs:

The post Metal Stitching | Metal Locking | Crack Repair | Metal Lock Surgery appeared first on Rebabbitting Bearing.

It is proven that the repair of cracks in cast iron or cast steel castings is successful by metal stitching and metal locking process in comparison to the old welding process that was followed.

The advantages of crack repair by metal stitching and metal locking process are as follows:

• Metal stitching and metal locking processes repair cracks in engine blocks, cylinder heads, and turbines on-site without disassembling the equipment. This process of repair saves downtime and is cost-effective.
• The metal locking and metal stitching process provides an excellent expansion joint for engine parts such as cylinder liners, crankcases, and cylinder heads, which are subject to thermal and mechanical stresses. The main advantage of repairing cracks using the metal stitching and metal locking process is that the process develops no stresses and maintains alignment with the original surfaces because it produces no heat and causes no distortion.
• The procedure and process of repair of cracks by metal stitching and metal locking are accepted by various classes and inspection agencies.
• The process of metal locking and metal stitching is cold, no heat is generate and in most cases, there is no need to replace heavy and expensive parts.

Metal Stitching Of Engine Block

RA Power Solutions Pvt. Ltd. undertakes the repair of cracked or damaged engine blocks using metal locking, metal stitching, and the metal surgery process. It is possible to repair damaged or cracked engine blocks on-site that are manufactured from the following base metals.

• Cast steel
• Aluminium casting
• Ductile iron
• Cast iron

With the introduction of modern technology and processes. Welding does not suit the repair of cracks in heavy-duty cast iron components because the welding process generates heat and unwanted stresses. It cause serious damage to the cast iron components.

The engine block repair by metal locking, metal stitching of the engine block, and the metal surgery process is a proven method of repair of cracks or damaged heavy components.

For more information on the Metal lock and metal stitching, metal locking process, metal stitching of castings, and metal stitching of engine block and cold metal stitching, crack repair by metal stitching, please email us at rajshahani@rapowersolutions.com, or info@rapowersolutions.com, or call us at +91 9582647131 or +91 9810012383.

FAQs:

The post Crack Repair By Metal Stitching | Advantages Of Metal locking And Metal Stitching appeared first on Rebabbitting Bearing.