The Metal Lock and Metal Stitching process has the following advantages:

I) In case of a cracked or damaged component, there is no need to send it to the designated workshop. Our technicians visit the site and undertake the repair of cracks by the metal locking and metal stitching process.

II) Metal locking and metal stitching a proven methods of repair for cracks. This permanent solution uses a cold process to repair cracks and generates no heat, unlike welding.

III) If a large portion of the casting is damaged, you can replace it with a new casting that has the same design, profile, and metallurgical properties using metal stitching and metal locking.

We have provided services of crack repair and repair of damaged casting for the last 4 decades all over the world. We are cost-effective and execute the repairs with a guarantee.

Repair Cast Iron | Metal Lock Surgery | Cast Iron Repair

We undertake cast iron repair by the metal surgery process. It is a cold process of crack repair in cast iron, aluminium casting, and cast steel casting. Metal surgery repairs strictly maintain the original alignment and profile because the process produces no heat and causes no distortion.

Most of the repairs in cast iron are possible without dismantling the damaged component from the main equipment. We use portable pneumatic tools to undertake cast iron repair by metal stitching, metal locking, and metal surgery.

 For more information about metal lock surgery, metal locking services, please email us at rajshahani@rapowersolutions.com or info@rapowersolutions.com or call us at +91 9582647131 or +91 9810012383.

FAQs:

The post Metal Locking and Metal Stitching | Metal Stitching Engine Block appeared first on Rebabbitting Bearing.

At RA Power Solutions, we specialise in cast iron metal surgery and crack repair. We use advanced techniques that restore structural integrity and performance without the drawbacks of traditional welding methods.

  A leading shipping company operating in the Middle East approached us for assistance. One of their auxiliary engines, a Daihatsu 6DK20, met with an accident. A connecting rod bolt failure breaks the engine block window, where the cover is fixed, into multiple pieces.

RA Power Solutions Pvt. Ltd. technicians prepared a rough drawing of the broken cast-iron area of the engine block, as shown below.

Cast Iron Metal Surgery

Metal surgery refers to a group of cold repair techniques designed to restore cracked or broken cast iron parts without excessive heat. Unlike welding, which generates heat and can distort the component, metal surgery methods preserve the material’s original alignment and dimensions. These processes include metal stitching, metal locking, cold stitching, brazing, fusion techniques, and controlled stress relief treatments.

Since the time was short, we manufactured a casting measuring 15 x 15 inches, and two technicians boarded the vessel. The job of repairing the cast-iron engine block was executed in a recorded minimum time. The engine is performing satisfactorily.

We have all the latest tooling available for the repair of cast iron.  The parts of the diesel engine are to return to their original shape and profile. The metal stitching and metal locking process, followed by us to repair the cast iron, gives more strength than the original casting.

The post Metal Surgery of Cast Iron | Cast Iron Crack Repair appeared first on Rebabbitting Bearing.

It is proven that the repair of cracks in cast iron or cast steel castings is successful by metal stitching and metal locking process in comparison to the old welding process that was followed.

The advantages of crack repair by metal stitching and metal locking process are as follows:

• Metal stitching and metal locking processes repair cracks in engine blocks, cylinder heads, and turbines on-site without disassembling the equipment. This process of repair saves downtime and is cost-effective.
• The metal locking and metal stitching process provides an excellent expansion joint for engine parts such as cylinder liners, crankcases, and cylinder heads, which are subject to thermal and mechanical stresses. The main advantage of repairing cracks using the metal stitching and metal locking process is that the process develops no stresses and maintains alignment with the original surfaces because it produces no heat and causes no distortion.
• The procedure and process of repair of cracks by metal stitching and metal locking are accepted by various classes and inspection agencies.
• The process of metal locking and metal stitching is cold, no heat is generate and in most cases, there is no need to replace heavy and expensive parts.

Metal Stitching Of Engine Block

RA Power Solutions Pvt. Ltd. undertakes the repair of cracked or damaged engine blocks using metal locking, metal stitching, and the metal surgery process. It is possible to repair damaged or cracked engine blocks on-site that are manufactured from the following base metals.

• Cast steel
• Aluminium casting
• Ductile iron
• Cast iron

With the introduction of modern technology and processes. Welding does not suit the repair of cracks in heavy-duty cast iron components because the welding process generates heat and unwanted stresses. It cause serious damage to the cast iron components.

The engine block repair by metal locking, metal stitching of the engine block, and the metal surgery process is a proven method of repair of cracks or damaged heavy components.

For more information on the Metal lock and metal stitching, metal locking process, metal stitching of castings, and metal stitching of engine block and cold metal stitching, crack repair by metal stitching, please email us at rajshahani@rapowersolutions.com, or info@rapowersolutions.com, or call us at +91 9582647131 or +91 9810012383.

FAQs:

The post Crack Repair By Metal Stitching | Advantages Of Metal locking And Metal Stitching appeared first on Rebabbitting Bearing.