Crankshaft Reconditioning | Crankpin Reconditioning & Crankpin Machining by Crankshaft Grinder – RA Power Solutions

To avoid crankshaft from rejection or to reduce the minimum diameter of Crankpin and Main journal after grinding companies all over the world are approaching RA Power solutions for onsite repair of the crankshaft.

Ra Power solutions is having the expertise of successfully repairing more than 10,000 crankshafts for different applications and diameter ranging from 30 mm to 700 mm. There are companies based in Europe who had the monopoly in onsite grinding and repair of crankshaft and were charging exorbitantly. By introduction of onsite repair of the crankshaft, RA Power Solutions has bought a revolution by executing onsite crankshaft repair far better than the international standards and with the lowest price. In this time of recession when the shipping companies and large industries are passing through difficult times repair of crankshaft, maintenance and overhauling of diesel engine and all services related to engine room offered by RA Power has resulted to considerable savings for the shipping companies and heavy Engineering organizations having Diesel power plants.

Grinding of Crankpin by Crankshaft Grinding Machine is in Process
Grinding of Crankpin by Crankshaft Grinding Machine is in Process

We follow the below mentioned procedure for successful onsite repair of crankshaft:
I) Thorough cleaning of Crankshaft/Main Journal which is damaged.
II) Visual inspection of radius fillet, lubrication oil hole, surface finish, and other parameters of Crankpin and Main journal.
III) Conducting of NDT test by qualified technicians with latest instruments for crack repair, hardness test, surface finish, dimensional inspection, etc.
IV) Selection of correct onsite tooling to execute the grinding and polishing.
V) Final inspection by senior technicians of crankshaft and preparation of reports.
All the crankshaft reconditioning jobs undertaken by RA Power Solutions are guaranteed for the satisfactory performance.

Onsite Crankshaft Grinding while Vessel is on Move
Onsite Crankshaft Grinding while Vessel is on Move
Crankpin After Grinding by Onsite Crankshaft Grinder
Crankpin After Grinding by Onsite Crankshaft Grinder

 

 

 

 

 

 

 
RA Power Solutions is the only company in the world which apart from providing onsite repair services also sells onsite crankshaft grinding machine capacity ranging from 30 mm to 700 mm. More than seventy crankshaft grinder machine have been sold worldwide. Hundreds of technicians have been trained to execute successful repairs of crankshaft onsite.

Onsite Crankshaft Grinding Machine Offered by RA Power Solutions
Onsite Crankshaft Grinding Machine Offered by RA Power Solutions

To avoid crankshaft from rejection or to reduce the minimum diameter of Crankpin and Main journal after grinding companies all over the world are approaching RA Power solutions for onsite repair of the crankshaft. Ra Power solutions is having the expertise of successfully repairing more than 10,000 crankshafts for different applications and diameter ranging from … Continue reading “Crankshaft Reconditioning | Crankpin Reconditioning & Crankpin Machining by Crankshaft Grinder – RA Power Solutions”